C270 Mast Raising System
C270 Mast Raising System |
|
|
| The heart of the system is a SS cable harness. It positions a one inch ring as the pivot point for two wire A frames inline with the mast pivot point. One "A" frame centers the mast while lowering and the other centers the whisker pole. The whisker pole is used fully collapsed with both headsail halyards attached to a one of a pair of boom bails. The 4:1 gear attaches to the second boom bail while the pole connects to the bolt holding the bails together. | ||
 cartension.jpg 46.26 Kb |
 furlerpinout.jpg 62.49 Kb |
 furlerrest.jpg 62.34 Kb |
 furlertension.jpg 66.43 Kb |
 mast30d.jpg 59.73 Kb |
 mast45d.jpg 62.58 Kb |
 mast60d.jpg 65.57 Kb |
 mast80d.jpg 64.07 Kb |
 mastfinal.jpg 53.18 Kb |
 mastfinal1.jpg 55.46 Kb |
 mastfinal2.jpg 57.30 Kb |
 pivotringattach.jpg 38.02 Kb |
 pivotringdetail.jpg 59.01 Kb |
 pivotringinuse.jpg 61.77 Kb |
 poleend.jpg 57.33 Kb |
 poleend1.jpg 56.66 Kb |
 poleend2.jpg 41.01 Kb |
 poleend3.jpg 40.77 Kb |
 poleend4.jpg 34.65 Kb |
 polemast.jpg 52.57 Kb |
 polemast1.jpg 52.60 Kb |
 undertension.jpg 64.25 Kb |
Page 1 of 1